Tuesday, April 15, 2025

  • RSS
  • Design and Simulation:These are some books which are recommended as a reading list. 1- Aerodynamics of Road Vehicles from Fluid Mechanics to Vehicle Engineering. Edited by Wolf-Heinrich Hucho 2- Hucho-Aerodynamik des Automobils Stromungsmechanik.Warmetechnik. Fahrdynamiik.Komfort
  • Optimizing Performance and Fuel Economy of a Dual-Clutch Transmission Powertrain with Model-Based Design.
  • Wind Turbine DesignPrimary objective in wind turbine design is to maximize the aerodynamic efficiency, or power extracted from the wind. But this objective should be met by well satisfying mechanical strength criteria and economical aspects. In this video we will see impact of number of blades, blade shape, blade length and tower height on wind turbine design.
  • Modelling Complex Mechanical Structures with SimMechanicsModeling physical components or systems in Simulink® typically involves a tradeoff between simulation speed and model fidelity or complexity: the higher the fidelity of the model, the greater the effort needed to create it..
  • Biomass Energy Vs. Natural GasIn 2009, natural gas prices plunged to below $4 per MMBtu where many "Experts" are saying that prices will remain low for decades as a result of technology break-throughs allowing for sizable increases in natural gas supply for North America. The Energy Information Agency (EIA) just released data projections reflecting this potential increased supply in natural gas.
Require content

Sunday, 8 November 2009

Congress Gets F in Energy 101 (Part 2)

Posted by Sohail Azad On 05:02 No comments

Renewable Energy World has a current article on the value of the "heat" component CHP (combined heat and power) from biomass energy.

The article has the following graph, illustrating the greenhouse gas benefits of the "heat" CHP component, like with using biogas for industrial product drying. Note the highest level of greenhouse gas benefits is the 3rd bar -- the scenario with the highest "heat use" component.



But, lets look at how Congress views the "heat" component of CHP in providing economic incentives under the Section 45 Tax Credit to promote biomass energy:

(1) If a biomass gasification project used 100% of the biogas for the production of electricity ONLY, the project qualifies for a 30% investment tax credit towards the capital costs.

(2) If the same above project was for CHP, the tax credit is reduced to 10%.

(3) If the project uses 100% of the biogas for an industrial processes "heat" requirement, the project's tax credit would be ZERO!

0 comments:

Post a Comment