Thursday, April 10, 2025

  • RSS
  • Design and Simulation:These are some books which are recommended as a reading list. 1- Aerodynamics of Road Vehicles from Fluid Mechanics to Vehicle Engineering. Edited by Wolf-Heinrich Hucho 2- Hucho-Aerodynamik des Automobils Stromungsmechanik.Warmetechnik. Fahrdynamiik.Komfort
  • Optimizing Performance and Fuel Economy of a Dual-Clutch Transmission Powertrain with Model-Based Design.
  • Wind Turbine DesignPrimary objective in wind turbine design is to maximize the aerodynamic efficiency, or power extracted from the wind. But this objective should be met by well satisfying mechanical strength criteria and economical aspects. In this video we will see impact of number of blades, blade shape, blade length and tower height on wind turbine design.
  • Modelling Complex Mechanical Structures with SimMechanicsModeling physical components or systems in Simulink® typically involves a tradeoff between simulation speed and model fidelity or complexity: the higher the fidelity of the model, the greater the effort needed to create it..
  • Biomass Energy Vs. Natural GasIn 2009, natural gas prices plunged to below $4 per MMBtu where many "Experts" are saying that prices will remain low for decades as a result of technology break-throughs allowing for sizable increases in natural gas supply for North America. The Energy Information Agency (EIA) just released data projections reflecting this potential increased supply in natural gas.
Require content

Wednesday, 24 February 2010

CO2 Benefits of Biomass Energy Vs. Solar and Wind Energy (Part 2)

Posted by Sohail Azad On 11:26 No comments

In Part 1 of this series, we discussed the importance of viewing renewable energy technology options (wind, solar, geothermal, biomass) on a "big picture" (macro) basis using the integrated resource grid. The key concept under this view is that not all renewable energy options have the same impact in displacing fossil fuel use for electricity generation:

  • Typically, solar power and many wind power resources are considered "peaking units", which displace natural gas and oil fired generation.
  • Conversely, biomass and geothermal resources are often dispatched as base load units which would typically (especially in the Southeastern and Mid-Western U.S.) displace coal fired generation.
  • Today in Part 2 of our series, we will address the question: Is Biomass Energy Really Carbon Cycle Neutral? Hopefully, some pictures of our sustainable biomass energy efforts here in Florida will be better than a thousand words in answering this question.

    The first picture below reflects what our land sources looked like before planting energy crops -- unused mining lands dominated by an invasive species plant of cogongrass.


    The next two pictures reflect what our sites look like 1 to 2 years after planting energy crops (e.g., fast growing trees, sorghum):

    As the above pictures reflect, our sustainable energy crop efforts CREATED a carbon bank that we then used for energy production.

    In addition, when biomass energy resources are developed in a environmentally responsible and sustainable way -- biomass energy can exceed the CO2 benefits of other renewable energy sources and be "Carbon Cycle Negative":

  • Sequestering carbon below ground through energy crop root systems.
  • Incorporating a stable component of carbon (biochar, a waste product of biomass gasification) into soils.
  • Incorporating advanced recycling and composting methods for soil building using crop waste streams (e.g., sorghum bagasse).


  • 0 comments:

    Post a Comment