As much of the U.S. digs out from freezing weather and snowstorms, Florida's extended growing season allows Farmers to still be growing and harvesting crops like sweet sorghum for ethanol feedstock. A late fall/early winter crop rotation for sorghum takes a little longer to mature (approximately 105 to 110 days from planting) compared to warmer months (where plant maturity occurs in ~90 days) -- due to the reduced amount of daylight hours. Also, while the sorghum's brix (sugar content) appears to be consistent at ~18 throughout all yearly rotations, yields during the fall/winter rotation can be ~40% less than warm weather months primarily because of reduced rainfall (as we do not field irrigate our sorghum). Ratoon yields of our sorghum is extremely poor, as we are using commercial hybrids.
Because of this extended growing season, it is believed that the typical agriculture plan for growing sweet sorghum can be three (3) crop rotations per year on the same acreage (allowing for cyclical soil resting/building to reduce plant disease/pests by rotating in crops like soil nitrogen building white clover legumes).
In early December we conducted sweet sorghum harvesting trials using the newly developed John Deere 3520 cane harvester (developed primarily for the sugar cane industry in South Florida, Louisiana, and Brazil). The capital cost of the Deere 3520 is ~$310,000 with the ability to harvest between 8 and 10 acres per hour (or around +100 acres per day).
The first two pictures below show the Deere 3520 and its total 9 foot width, and 3 foot cutting area dimensions:
The next two pictures shows the sorghum product of the Deere 3520 Harvester -- a 4 to 6 inch billet which is blown into a trailing hay wagon.
The Deere 3520 provides for flexibility in field row planting configurations (18, 24, 36 inch centers) allowing for single pass, two row and even 3 row cutting. The below schematic illustrates the row planting configuration that we use.
Sunday, April 13, 2025
- Design and Simulation:These are some books which are recommended as a reading list. 1- Aerodynamics of Road Vehicles from Fluid Mechanics to Vehicle Engineering. Edited by Wolf-Heinrich Hucho 2- Hucho-Aerodynamik des Automobils Stromungsmechanik.Warmetechnik. Fahrdynamiik.Komfort
- Optimizing Performance and Fuel Economy of a Dual-Clutch Transmission Powertrain with Model-Based Design.
- Wind Turbine DesignPrimary objective in wind turbine design is to maximize the aerodynamic efficiency, or power extracted from the wind. But this objective should be met by well satisfying mechanical strength criteria and economical aspects. In this video we will see impact of number of blades, blade shape, blade length and tower height on wind turbine design.
- Modelling Complex Mechanical Structures with SimMechanicsModeling physical components or systems in Simulink® typically involves a tradeoff between simulation speed and model fidelity or complexity: the higher the fidelity of the model, the greater the effort needed to create it..
- Biomass Energy Vs. Natural GasIn 2009, natural gas prices plunged to below $4 per MMBtu where many "Experts" are saying that prices will remain low for decades as a result of technology break-throughs allowing for sizable increases in natural gas supply for North America. The Energy Information Agency (EIA) just released data projections reflecting this potential increased supply in natural gas.
0 comments:
Post a Comment